Add one 25-pound bag of salt for every 1,000 gallons of water. Do not use yellow or iodine salt.

With your Intex pool water clean and balanced, half of your pool care work is out of the way. The rest of the job is keeping your pool clean and balanced. Here are a few must-have accessories for Intex pool care: Telescopic pole; Skimmer attachment; Brush attachment; Vacuum hose; Vacuum head; Pool chemicals (listed above) 1.) Clean your water. Jul 11, 2018  By popular demand, here is a video on how I set up the pool vacuum. I've had many requests to make a video on how to set up the Bestway Pool Vacuum and I finally got around to it.

Go to a pool supply company, and get salt for the pool. If you're converting your pool from a chlorine-treated pool to a salt water pool, wait two days, so the chlorine dissipates.

The sun and heat remove chlorine, so you don't have to add anything to get rid of it. Since the early 1980s, salt water pools were used in Australia, and since 1990, all countries started using salt water in the pools. Many hotels, schools and home pools have switched over to salt water. The salt in the water is diluted to the point no one notices that it's a salt water pool. The salt content is about the same as a human tear. The biggest benefits are that you use less chemicals, have less problems with the alkalinity, and it doesn't damage your skin or hair. Tips.

The salt/water ratio must be 3,000 to 3,500 for the Intex chlorine generator to produce the chlorine accurately. The Intex chlorine generator lights up green on the control panel when chlorine is produced. A red light tells you either the salt is too low or too high. Test the salt to determine what is needed. Let it generate at least six hours during hot weather and at least three during cool weather. It needs to run every day for chlorine level maintenance. The factors that determine how long the chlorine generator stays on each day is the sun's heat and where you live.

Heat and sun leach chlorine from your pool, so check the chlorine often. If it stays too low, increase the time the generator runs.

If it stays too high, decrease the generator's operation. Always check the pool one hour before swimming, and turn on the generator for an hour if the chlorine is in the low range on the test strip.

I didn't take my intex easy set pool down last winter because it's so hard to level the ground every year and I'd had surgery right before winter, so it just wasn't plausible. Anyway, I figured that if I drained it this spring I would have no issues cleaning it. There was dead algae and other gunk I couldn't clean out of it myself, so I filled it back up and decided I would vacuum up all the crud. I purchased the 1600gph sand filter (I have the 15ft, 42in deep pool) and tried to use a pool vacuum hooked up to that, but it kept shooting all the algae back into the pool and would lose too much water if I unhooked the water inlet hose.

So I started looking online again and was thrilled (but skeptical) when I saw this. I was intrigued at the idea of. So the first day I used the vacuum, I was so frustrated I wanted to return the whole package to Amazon. We had the filter pump running on our 15x42 pool and I could not get any suction at all. My son and I spent more than an hour submerging the hose and letting air out of the pump to get it to work. It only worked once, and then it stopped working. I went online and did some reading of others with this product and decided to try again.

The steps I took to get this to work are 1) Unplug filter pump 2) Put vacuum under the water with hose attached slowly and start putting the hose under water about a foot at a time (don't just dunk the whole thing at once) starting at the vacuum end. 3) Hook up the hose. Reasonable expectations equals (probable) product satisfaction.Like you I read reviews of a number of similar products before before purchasing this one. As usual there some negative and some positive entries, so I look for a trend (i.e. Design flaw, broken on arrival.multiple people saying the same thing.) after reading them, buying it, and using it, I had a good idea of what to expect. The bottom line is, it works as it should. It is a small vacuum for a small pool or spa.

If your expectations are that this is a cheap little maintenance tool to get the dust and debris off the bottom, you'll be happy with it! If on the other hand you expect it to be a magic wand that with one waive will erase months of neglect, you will be disappointed and probably give it a bad review. That said.It really does work as described. For years we have battled vacuuming pollen and fine particles to waste in order to have crystal clear water.

Our pool bot does a magnificent job of removing the fine particles, thus saving us tremendous water usage and hours of manually vacuuming. Our pool is oval and although it works independently, we do monitor it to help adjust the direction if it gets stuck in the same area. Bags and bot are easy to use and must be rinsed every time for longevity and performance. It is well worth the investment! I have a pool under a huge oak tree with an in-floor cleaning system. In the fall when the tree drops acorn and in the winter when it drops leaves, I am faced with huge amounts of stuff in the bottom of the pool that overwhelms the in-floor system and clogs the lines resulting in a lot of effort (and at times a call to my installer) to clear things up. I bought this to remove the leaves and acorns from the bottom of the pool before the lines get clogged.Generally, it meets my expectations on light items that have some buoyancy (like leaves).

The Poolmaster generates not so much a suction as it does a gentle upward flow that carries light items with it. It works very well on the leaves, but not so well on heavier objects like acorns.The build seems a little flimsy, The. I've been using Kreepy Krauly for over 30 years, and got tired of dishing out $300-400 every 4-5 years or so. So I decided to give this low cost option a chance. Set up was fairly straight forward as expected, considering my extensive experience with the Kreepy. The second day of operation the cleaner stopped working.

I pulled it out and jiggled the flapper, and it has worked flawlessly for three months.until this past week when it stopped again. Jiggling the flapper no longer fixes the problem, and it appears I am going to have to open it up and check out the flapper assembly.

The instructions outline a procedure for this task, which I have not done yet. I will amend review if I am unable to fix the problem.Checking the instructions is when I noticed that there is no way to. Love the filter. Oversized but much more efficient. I have a 9'x18' Intex pool. Filter that came with it had to run much more. Electricity was a lot.

This has to run for a brief period once pool is clean and ready to use. But preparing to reopen after winter only took a third of the time with this filter as in the previous 4 summers with the smaller filter. This new one does take 2 1/2 bags of sand. Had to run back to the store for it! Also loses very little sand on the backwash unlike the small one that came with pool.The vacuum on the other hand is just ok.

I was excited about the screen inside and the leaf chamber as I was always having to stop my pump while vacuuming to clean off the intake screen as it clogged. But this hooks to the. I love this!!! Very skeptical because of reviews. Now first, i used a manual vac a lot. Back washing, loosing lots of water, and always adding chemicals. Don't have any trees or young kids but i have the after effect of chemicals in middle of pool.

I bought the pole and extra micro filters. Nuovo cinema paradiso versione integrale torrent italian restaurant. My charger has a red and green light(green means fully charged). The pole i received is very sturdy(but i get in the pool to use) not using 10 feet away.

It vaced the powder right up in the bag. I did loose suction about 20 min.

But its because the filter couldn't get enough air because of sand and left over chemical powder. Not because of battery. I hand washed the 2 bags and did more. Now- i have a 28 foot round pool 23000 gal. After the big spot in middle and cleaned the. My above ground pool came with a Hayward Aquabug cleaner.

The Aquabug did an excellent cleaning job, and took less time to clean my pool than the Kreepy Krauly 'Lil Shark. The problem with the Aquabug was that it only lasted for 1 season before the gears wore out and it quit moving.Last summer, I bought the 'Lil Shark as a replacement for my Aquabug. It has less moving parts; so there is less to wear out on it. I used my 'Lil Shark all season last year and it worked very well.

I just opened my pool this year; and so far the 'Lil Shark still works like new.I live in New Mexico and get a lot of blowing dirt on the bottom of my pool. The 'Lil Shark automatically cleans the bottom of my 13'x25' pool in about 4-5 hours.